Pixsys
Pixsys ATR224-12ABC | 48x48mm PID Controller
Pixsys ATR224-12ABC | 48x48mm PID Controller
Couldn't load pickup availability
PID Controller ATR224 is a simplified and reduced version of the ATR244 series.
The input is programmable for temperature sensors (resistance thermometers and thermocouples), or for mA/Volt current/voltage process signals, often used for pressure transmitters, humidity and flow sensors, or inverters.
Controller outputs are selectable as command and multiple alarm modes (band, deviation...)
The extended range power supply from 24 to 230V AC/DC increases its flexibility.
It is supported by MyPixsys App for configuration via NFC/RFID.
|
ORDERING CODES |
ATR224-12ABC |
|---|---|
|
Power supply |
24..230 V AC / DC ±15% 50/60 Hz - galvanic isolation 2,5KV |
|
Power consumption |
8 Watt/VA |
|
Display |
4 digits 0,52’’, 5 digits 0,30’’ |
|
Analogue inputs |
1 x Ris. 16bit, programmable for thermocouples K, S, R, J, T, N, B (automatic compensation of cold junction-25..85°C, ±0,2% F.S. ±1 digit F.S.), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (β 3435K),process signals 0..10 V (50000 points), 0/4..20mA (40000 points), 0..60 mV (25000 points), potentiometer 1..150 KΩ (50000 points) |
|
Sampling time |
Programmable up to 2,1 ms (frequency up to 470 Hz) |
|
Digital inputs |
1x PNP |
|
Digital outputs |
1x SSR 12 / 24 V DC - 25 mA max |
|
Auxiliary Outputs |
12/24 VDC - 30mA max for sensor supply |
|
Relais outputs |
2x 2 A - 250 V AC resistive load |
|
USB |
1x micro USB for programming via PC with LabSoftView |
